Online Store

Ceramic Crystal Creme is the best paste wax you will ever use. It lasts up to 1 year or more and can be used as a stand alone coating or to maintain your existing ceramic coating. Applies just like a high end wax with no lengthy cure time needed, and can even be applied over plastics and trim.  Crystal Creme provides excellent UV protection, adds high gloss, and beads water like crazy!

Our Super Slick Ceramic Infused Sealant gives virtually any surface a silky smooth finish with superior water beading protection. Helps coatings last longer while adding protection and shine, but can also be used as a stand alone sealant if you are not quite ready for a full blown permanent 9H ceramic coating. Works great on paint, gel coat, glass, trim, leather, vinyl, countertops, stainless steel, ceramic sinks etc. Gentle formula that won’t strip wax, sealant, or vehicle coatings.
Made by Professionals for Professionals, but easy enough for anyone.

 DIRECTIONS FOR USE AS A SPRAY SEALANT OR COATING RECHARGE:

1. Make sure surface is clean and free of spots or smudges SHAKE BOTTLE to mix contents
2. Lightly mist one small section at a time. Using a clean microfiber cloth lightly buff section until even
4. Flip towel to dry side and buff until dry to reveal shine and silky smooth feel
6. Repeat if necessary
*If surface is warm we recommend spraying directly onto the microfiber towel and applying with the towel. This also prevents overspray to undesired areas.
Can also be used as a Quick Detailer to remove water spots,
or to enhance shine and add protection on the go.

Quick Shine Nano Detailer helps maintain and rejuvenate your ceramic coating. Use after every wash to aid in drying and add protection and gloss.  Can also be used as a waterless wash and shine.

With the use of a quick detailer you can drastically reduce washing to about every other week on your commuter car, and once a month for the weekend, depending on weather conditions of course. Time is only one factor in considering quick detailing. Water shortages, lack of facilities and bad weather are also things that make normal washing more difficult.

Done properly, LA-DS80 detailing spray can reduce the amount of time you spend cleaning your car. It also reduces the effects of harmful elements on your ceramic coating, like road grime, bird droppings, bugs, and keeps your car looking sharp. Ten minutes every day or every other day is all it takes to maintain a great looking finish.

LA-DS80 is not just for the exterior of your car. It also works great for your car's interior as well. It will remove dust, fingerprints and light soil from all surfaces, even if it is not Liquid Armour coated.

DIRECTIONS:

1. Shake bottle well.
2. Spray directly on soft micofiber towel and on cool surface
(one area at a time)
3. Gently wipe and lift to pick up grime.
4. Immediately use a second dry towel and gently buff.

Premium quality 380gsm microfiber coatings applicator. Non absorbent foam interior minimizes product waste.  Designed exclusively for Liquid Armour Protective Coatings. Excellent for coatings professionals that do large and frequent projects.

LIQUID ARMOUR QUICK SHINE WATERLESS NANO DETAILER USES A BLEND OF POWERFUL CLEANING AGENTS TO SAFELY LIFT AWAY DIRT WHILE POLYMER EMULSIONS HELP SHINE AND PROTECT.  EASY TO USE SPRAY AND WIPE FORMULA THAT MAKES CLEANING EASY AND MORE ECO CONSCIOUS WHILE ADDING PROTECTION.  NON-TOXIC, BIODEGRADABLE, AND MULTI-SURFACE SAFE.  

Quick Shine Nano Detailer helps maintain and rejuvenate your ceramic coating. Use after every wash to aid in drying and add protection and gloss.  Can also be used as a waterless wash and shine.

Done properly, LA Quick Shine can reduce the amount of time you spend cleaning your car. It also reduces the effects of harmful elements on your ceramic coating, like road grime, bird droppings, bugs, and keeps your car looking sharp. 

LA-QS Nano Detailer is not just for the exterior of your car. It also works great for your car's interior as well. It will remove dust, fingerprints and light soil from all surfaces, even if it is not Liquid Armour coated.

QUICK DETAILING HOW TO

• Always use a high quality microfiber buffing towel and fold your towel into quarters.
• Start at the top and work your way down to the lower surfaces of your car. Holding the Quick Detail Spray 12" away, lightly mist about a 2' by 2' area 
• Gently wipe in a straight line back and forth , then flip the microfiber buffing towel and buff dry.
• As the surface of the microfiber buffing towel gets dirty, flip it to a clean side.
• If needed, when all sides of the towel start to look a little dirty, switch to a fresh microfiber buffing towel.

PRO TIP! For that flawless, just detailed look after washing your car, use the LA Quick Shine detailer to eliminate any streaks, spots and enhance the gloss.

Liquid Armour Nano Coat multi-surface stain and UV protective coating forms nanoscale layers on textiles and hard surfaces, immediately bestowing anti-stain and water resistant properties on most materials. Fabrics coated with Liquid Armour's nanoscale hydrophobic treatments become very easy to clean as they inherit water, oil, and dirt repelling characteristics. There are several methods for applying Liquid Armour's innovative hydrophobic coating technology, each of them are easy to perform. 

Liquid Armour's Nano Coat is a best-in-class repellency technology.  It is designed to make many surfaces hydrophobic, repellent to water and other liquids, and keep the treated surface cleaner as a result. LA Nano Coat is easy to apply, optically clear and ultra thin. It can even be applied via several application methods. Features include:

• Extreme Waterproofing and Spill Protection
• UV Protection
• Stain Resistance
• Optically Clear (100% transmission)
• Apply via Dip, Wipe, or Spray
• Applies in Minutes

Our Specially Formulated multi-surface foaming wash is the perfect first step for ceramic coating prep. Also amazing as a maintenance wash for all surfaces.  Cars, boats, RVs, Motorcycles, aircrafts, or even around the home! 

We formulated this Eco-conscious Ph neutral combo to be 100% free of Wax, Silicone, and Dyes.

Safely removes Dirt, Grease, Tar, Bugs, Iron Contaminants and any other junk we didn't mention.
 
Directions:
Add 1oz to s foam gun, or apply a small amount directly to a wash mit or sponge and apply to small sections before rinsing mit.  Let stand 3-4 minutes then rinse thoroughly with filtered water then dry. 

Note: For heavy contamination FALLOUT iron remover will still be needed.

Deacon+ may affect oil base waxes.

LOTUS FX is a SEMI-Permanent Nano-Ceramic Coating that features a High Gloss finish, Super Hydrophobic Effect, Scratch Resistance, Chemical Resistance, UV Resistance, Thermal Resistance, and Anti-Graffiti effects.

Both the Super Hydrophobic and Anti-Graffiti effect combined mean that surfaces coated with LOTUS FX will stay cleaner for longer as dirt and grime will not stick to the surface.  Once cured the coating will cause water to bead up and roll off the surface along with dirt and contaminants. The hard ceramic film also offers protection from damaging contamination and harsh chemicals.

This formulation is easy to use for the enthusiast and professional alike.

Works great on all hard surfaces and even residential applications like glass, countertops, stainless steel, and tile and grout! 

Experience the benefits of the "Lotus Effect"

Liquid Armour 9H is a Permanent Nano-Ceramic Coating that features a High Gloss finish, unmatched Super Hydrophobic Effect, Scratch Resistance, Chemical Resistance, UV Resistance, Thermal Resistance (800ºC), and Anti-Graffiti effects.

Both the Super Hydrophobic and Anti-Graffiti effect combined mean the surface coated with 9H will stay cleaner for longer as dirt and grime will not stick to the surface, and the super hydrophobic effect of the coating will cause water to bead up and roll of the surface along with any dirt and grime. The hard ceramic film also offers superior protection from damaging contamination and harsh chemicals.

Liquid Armour 9H forms a permanent bond to the surface and will not wash away or break down. Liquid Armour 9H can only be removed by abrasion making it a highly durable protective coating that shields the surface from damaging contaminants.

The unique formulation of Liquid Armour 9H has enabled it to be multi-layered which means the thickness of the coating can be increased with additional layers allowing a thicker / harder film that will increase its thermal and scratch resistance.

Certified Professional Installers can offer a 3-5 year warranty depending on surface application and number of coats applied.  

Fallout Iron remover’s advanced pH-balanced (pH-7) formula safely breaks down ferrous metallic contamination caused by automotive brakes, and hard water from delicate vehicle and marine surfaces. It can be used on
paint, plastic, chrome, polished metals glass, alloy wheels, and fiberglass.
fallout works by forming a water-soluble complex with the iron particles
lodged in the surface, allowing them to be rinsed free, and cleaning deeper
than washing or claying alone. fallout is the best – acid-free iron ferrous
metallic remover to date.

During the use of your vehicle or boat , brake dust, road grime, & hard water
deposits bond to the surfaces due to the high temperature conditions they are
normally exposed to. Brake dust & hard water contain high levels of iron and
once bonded to the surface, become extremely difficult to dissolve or remove
without the use of harsh chemicals. Fallout opens up the surface pores to
release ferrous particles and to neutralize caustic compounds that have
developed in the subsurface. Ongoing damage is immediately stopped and
future damage is prevented by removing the ferrous particles.

Fallout Iron Remover works great on all solid automotive & marine surfaces.

Features:

Removes Iron Particles and prevents the spread of iron-related
damage & helps to protect your vehicle from paint system failure.
Safe for use on all solid surfaces. will not deteriorate clear coats.
Safe to use on Aluminum, Chrome, Alloy, or Clear coated wheels.
Safe to use, and pH neutral (pH -7).
Safe to use on Clear Coat Paint
(Avoid using on Fabric Convertible tops)

Liquid Armour Prep+ is a non hazardous formula that safely breaks down wax, silicone, tar, and other contaminants that can interfere with the bond and durability of coatings and sealants.  Safe on all surfaces. PH neutral and will not harm clearcoat.  Disigned to be used as a final prep before applying ceramic coatings, but we have found it works great as an everday multipurpose cleaner as well.

These Ultra Soft Edgeless Microfiber towels are designed to be used to level and buff after ceramic coating. Recommend washing before use to soften fibers. 16x16 400gsm

These Ultra Soft Edgeless Microfiber towels are designed to be used to level and buff after ceramic coating. Recommend washing before use to soften fibers. 16x16 400gsm

Our Specially Formulated multi-surface foaming wash is the perfect first step for ceramic coating prep. Also amazing as a maintenance wash for all surfaces.  Cars, boats, RVs, Motorcycles, aircrafts, or even around the home! 

We formulated this Eco-conscious Ph neutral combo to be 100% free of Wax, Silicone, and Dyes.

Safely removes Dirt, Grease, Tar, Bugs, Iron Contaminants and any other junk we didn't mention.
 
Directions:

Add 1oz to a foam gun, or apply a small amount directly to a wash mit or sponge and apply to small sections before rinsing mit.  Let stand 3-4 minutes then rinse thoroughly with filtered water then dry. 

Note: For heavy contamination FALLOUT iron remover will still be needed.
Deacon+ may affect oil base waxes.
 

Liquid Armour PREP+ is a non hazardous formula that safely breaks down wax, silicone, tar, and other contaminants that can interfere with the bond and durability of coatings and sealants.  Safe on all surfaces. PH neutral and will not harm clear coat.  Designed to be used as a final prep before applying ceramic coatings, but we have found it works great as an everyday multipurpose glass cleaner as well.

Directions: 

1. EVENLY SPRAY ON SURFACE
2. AGITATE WITH A SOFT BRUSH, MICROFIBER CLOTH, OR WASH MIT
3. LET STAND FOR 20 SECONDS
4. RINSE AND WIPE CLEAN WITH A MICOFIBER CLOTH
5. REPEAT IF NECESSARY

Liquid Armour Flex Coat is a specially formulated nano ceramic coating designed to remain flexible while enhancing and adding protection for PPF, vinyl wraps, and interior applications like leather, vinyl, and plastics.  This easy to use fast cure coating imparts super hydrophobic effects as well as chemical, UV, thermal, and hard water resistance.

Coated surfaces will stay cleaner longer as dirt and other contaminants will instantly be encapsulated in water droplets and roll effortlessly off the surface.  This is known as the "self cleaning effect".

LA Flex Coat is also the perfect coating to help protect and prevent premature fading of marine cushions and curtains including clear vinyl.  

Flex Coat is compatible with with all types of PPF and vinyl wrap finishes including matte colors.  Due to the flexible nature of the coating it can even be used to enhance the ease of maintenance of self healing PPF.

Flex Coat is easily one of the most versatile and easy to use coatings on the market.  

Package includes 30ml. Flex Coat, Premium Applicator, and 400gsm edgeless microfiber leveling towel.  

Fallout Iron remover’s advanced pH-balanced (pH-7) formula safely breaks down ferrous metallic contamination caused by automotive brakes, and hard water from delicate vehicle and marine surfaces. It can be used on paint, plastic, chrome, polished metals, glass, alloy wheels, and fiberglass gel coat.
Forms a water-soluble complex with the iron particles
lodged in the surface allowing them to be rinsed free and cleaning deeper than washing or claying alone.

During the use of your vehicle or boat , brake dust, road grime, & hard water deposits bond to the surfaces due to the high temperature conditions they are normally exposed to. Brake dust & hard water contain high levels of iron and
once bonded to the surface, become extremely difficult to dissolve or remove without the use of harsh chemicals.  Damage is immediately stopped and
future damage is prevented by removing the ferrous particles.

Fallout Iron Remover works great on all solid automotive & marine surfaces.

Features:

• Removes Iron Particles and prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.
• Safe for use on all solid surfaces. will not deteriorate clear coats.
• Safe to use on Aluminum, Chrome, Alloy, or Clear coated wheels.
• Safe to use, Acid Free, and pH neutral (pH -7).
• Safe to use on Clear Coat Paint
• Avoid using on Fabric Convertible tops

Product: Next Level 6010 Men's Triblend Crew

• 4.3 oz.,
• Tri-blend (50% polyester/25% combed ringspun cotton/25% rayon jersey)
• Fabric laundered for reduced shrinkage
• 1x1 baby rib-knit set-in collar
• Soft, satin label
• Sideseamed
• Shoulder to shoulder taping
• Tear-away label

Product: Allmade AL6003 Allmade® Unisex Tri-Blend Hoodie Tee

• 4.2 oz,
• 50% recycled polyester/25% organic ring spun cotton/25% modal,
• 30 singles
• 1x1 rib knit sleeve cuffs
• Shoulder to shoulder taping
• Self-fabric drawcords
• Side seams
• Recycled tear-away label

SEMA Show award winning display kit that grabs your clients attention and helps to explain the benefits of choosing a Liquid Armour Coating.  An empty bottle that has pieces of cured coating inside to show clients the pure content of LA9H and that a true glass coating is being installed!

Liquid Armour 9H is a Permanent Nano-Ceramic Coating that features a High Gloss finish, unmatched Super Hydrophobic Effect, Scratch Resistance, Chemical Resistance, UV Resistance, Thermal Resistance, and Anti-Graffiti effects.

Both the Super Hydrophobic and Anti-Graffiti effect combined mean the surface coated with 9H will stay cleaner for longer as dirt and grime will not stick to the surface, and the super hydrophobic effect of the coating will cause water to bead up and roll of the surface along with any dirt and grime. The hard ceramic film also offers superior protection from damaging contamination and harsh chemicals.

Liquid Armour 9H forms a permanent bond to the surface and will not wash away or break down. Liquid Armour 9H can only be removed by abrasion making it a highly durable protective coating that shields the surface from damaging contaminants.

The unique formulation of Liquid Armour 9H has enabled it to be multi-layered which means the thickness of the coating can be increased with additional layers allowing a thicker / harder film that will increase its scratch resistance.

Product: Next Level 6010 Men's Triblend Crew

• 4.3 oz.,
• Tri-blend (50% polyester/25% combed ringspun cotton/25% rayon jersey)
• Fabric laundered for reduced shrinkage
• 1x1 baby rib-knit set-in collar
• Soft, satin label
• Sideseamed
• Shoulder to shoulder taping
• Tear-away label

Product: District DT6102 District® V.I.T.™ Fleece Full-Zip Hoodie

• 8.3 oz
• 65% ring spun cotton / 35% polyester
• 100% ring spun cotton face (Solids, Light Heather Grey)
• 60% ring spun cotton / 40% polyester (Heathers, Royal Frost)
• Jersey-lined, two-piece hood
• Dyed-to-match drawcords with aluminum grommets
• Dyed-to-match twill back neck tape
• Covered YKK aluminum zipper
• Side seamed
• 1x1 rib knit cuffs and hem
• Tear-away label